MTP cables are your best choice for high density fiber networks. It’s specifically designed for fast ethernet, fiber channel, data center and gigabit ethernet applications. This 12 Fiber harness cable is used for connecting (6) SFP+ into a MTP adapter panel and MTP trunk.
Product Specifications
Connector A Push Pull Tab MTP Connector B Push Pull Tab LC UPC Duplex
Fiber Mode OS2 SMF 9/125μm Wavelength 1310/1550nm
Insertion Loss MTP≤0.35dB, LC≤0.15dB Return Loss MTP≥60dB, LC≥50dB
Jacket OD 3.0mm Fan-Out Diameter 2.0mm
Installation Tensile Load 100 N Long-Term Tensile Load 50 N
Storage Temperature -40°C to +85°C Operating Temperature -10°C to +70°C
Cable Jacket LSZH Fiber Count 12 Fibers
“All in One” MTP Harness Cable
Push/pull tab connectors easy to install and remove with one hand
100% tested for ultra low insertion loss and back reflection
BIF allow routing through tight spaces with no impact on performance
Improved Designed Fiber Patch Cables for High-Density Applications
1. Multi-fiber Termination Push-on
Known for compact design and simple insertion and removal.
2. High-strength Closed Mesh Sheath
Ensures snag-free handling and creats optimal cable orientation and limits cable crossing.
3. Bend Insensitive Fiber & LSZH Jacket
High-performance bend insensitive fiber & low-smoke-zero-halogen property is optimal for high density data center areas.
