OEM Manufacturer Sfp 1.25g 1310nm 20km Lc - ST MM SX Adapter – Evolux Lighting Detail:
ST MM SX Adapter
A fiber optic adapter or coupler is a special passive component designed to mate or connect two ends of a fiber optic cable with high precision. Fiber optic adapters mate two ends of different fibers optic connectors, achieving the conversion between different connectors FC, SC, ST,LC, MTRJ, MPO, E2000 and so on. They are widely used for Optical Distribution Frame (ODF),fiber optic communication device and equipment, with excellent performance, good stability. We can also call them Fiber optic Flange or Coupler.
Most adapters are female on both ends, to connect two cables. Some are male-female, which typically plug into a port on a piece of equipment. This then allows the port to accept a different connector than for which it was originally designed. We discourage this use because we find the adapter extending from the equipment is subject to being bumped and breaking. Also, if not properly routed, the weight of the cable and connector hanging from the adapter may cause some misalignment and a degraded signal.
| Connector Type | ST |
| Polish Type | UPC |
| Fiber Mode | Multi mode |
| Fiber Counts | Simplex |
| Insertion Loss | ≤0.2dB |
Specification
|
Parameter |
Unit |
LC,SC,FC,ST,MTRJ,MPO |
|||
| SM | MM | ||||
| PC | UPC | APC | PC | ||
| Insertion Loss(Typical) | dB | ≤0.2dB | ≤0.2dB | ≤0.2dB | ≤0.2dB |
| Return Loss | dB | ≧45 | ≧50 | ≧60 | ≧30 |
| Exchangeability | dB |
≤0.2dB |
|||
| Repeatability | dB |
≤0.2dB |
|||
| Durability | Time |
>1000 |
|||
| Operating Temperature | ℃ |
-40~75 |
|||
| Storage Temperature | ℃ |
-40~85 |
|||
Features
Accurate Mechanical Dimensions
Low Insertion Loss,high return loss
Excellent compatibility
Excellent repeatability
Excellent Temperature stability
No Polishing, no Epoxy
More Convenient to install
Application
Local Area Network
Optical fiber communication system
Optical access network(OAN)
Optical CATV
Optical fiber sensor
Fiber optics data transmission(FODT)
Active device termination
Equipment test
Product detail pictures:
Related Product Guide:
China FC, Fiber-optic Connector, Single Mode (SM), for 0.9mm, 2.0mm and 3.0mm Cable on Global Sources | St Fiber Connector
Panduit FZTHP6NLSSNF021 Panduit QuickNet Fiber Optic Duplex Network Cable – Fiber Optic for Network Device, Switch – 1.25 GB/s – 21 ft – 1 Pack – 1 x MPO Male Network – 12 x LC Male Network – Aqua for Federal Government – November 16 – December 31 2018 | Lc To Sc Fiber Adapter
We have been ready to share our knowledge of internet marketing worldwide and recommend you suitable merchandise at most aggressive rates. So Profi Tools present you very best price of money and we are ready to develop alongside one another with OEM Manufacturer Sfp 1.25g 1310nm 20km Lc - ST MM SX Adapter – Evolux Lighting, The product will supply to all over the world, such as: United States , Bangkok , Jordan , Each customer's satisfactory is our goal. We are looking for long-term cooperation with each customer. To meet this, we keep up our quality and provide extraordinary customer service. Welcome to our company, we are expecting to cooperate with you.
By Madeline
from Sydney
- 2016.01.28 18:53
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Ann
from Ireland
- 2016.09.30 16:36
