SC-ST SM DX Metal Hybrid ADAPTER
Fiber optic adapter, sometimes also called coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines.
By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. FS.COM supplies a wide range of mating sleeves and hybrid adapters, including special male to female hybrid fiber optic adapter.
| Connector Type | SC-ST |
| Polish Type | UPC |
| Fiber Mode | Single mode |
| Fiber Counts | Duplex |
| Insertion Loss | ≤0.2dB |
Specification
|
Parameter |
Unit |
LC,SC,FC,ST,MTRJ,MPO |
|||
| SM | MM | ||||
| PC | UPC | APC | PC | ||
| Insertion Loss(Typical) | dB | ≤0.2dB | ≤0.2dB | ≤0.2dB | ≤0.2dB |
| Return Loss | dB | ≧45 | ≧50 | ≧60 | ≧30 |
| Exchangeability | dB |
≤0.2dB |
|||
| Repeatability | dB |
≤0.2dB |
|||
| Durability | Time |
>1000 |
|||
| Operating Temperature | ℃ |
-40~75 |
|||
| Storage Temperature | ℃ |
-40~85 |
|||
Features
1.Good Protection with Dust Cap
The fiber optic adapter is loaded with corresponding dust cap to prevent it from dust and keep it clean.
2.Simply Connecting Two Fiber Optic Cables
Allowing two devices to communicate from a distance through a direct connection with the fiber optic line.
3.High-precision Ceramic Sleeve
The internal ceramic sleeve is high precision to ensure maximum connection between fiber jumpers.
Application
Widely used in the ODF,Telicommunication networks
Optical communication system
Optical instruments measuring appliance
Optical fiber sensor
Optical fiber CATV
Local area network
