LC/UPC- LC/UPC MM OM4 DX 3.0MM PATCH CORD
Patch cords are classified by transmission medium (long or short distance), by connector construction and by construction of the connector’s inserted core cover
The connector’s inserted core cover conforms to APC, UPC, or PC configuration. A UPC inserted core cover is flat and is used in SARFT and early CATV. An APC connector’s inserted core cover is oblique (about 30 °, ±5 °).To reduce the back reflection of a connector,UPC polish. Industry standard is a minimum of–40 dB for PC back reflec-tion measurement and–50 dB for UPC back reflection measurement. If even less back reflection is required, an APC might be necessary. An APC connector has an 8ºangle cut into the ferrule. These connectors are identifiable by their green color. An APC polished connector has an Indus-try Standard Minimum of–60 dB measurement. APC fiber ends have low back reflection even when disconnected.
| Connector Type | LC-LC |
| Polish Type | UPC |
| Fiber Mode | MULTI MODE OM4 |
| Insertion Loss | ≤0.3dB |
| Return Loss | ≥50dB |
| Jacket OD | 3.0MM |
| Jacket Material | PVC/LSZH |
Specification
Features
Accurate Mechanical Dimensions
Low Insertion Loss,high return loss
Excellent compatibility
Excellent repeatability
Excellent Temperature stability
No Polishing, no Epoxy
More Convenient to install
Application
Local Area Network
Optical fiber communication system
Optical access network(OAN)
Optical CATV
Optical fiber sensor
Fiber optics data transmission(FODT)
Active device termination
Equipment test
Order information
