LC/UPC- LC/UPC SM DX 2.0MM PATCH CORD
Fiber optic patch cords are used not only for patching between panels and devices,
but also as preterminated fiber cable runs. As termination tooling can be expensive
and require craftsmanship to install, it is often easier to purchase preterminated fiber
cable lengths that are plug and play. Also, it is common for fiber cables to bridge
between Levels which may require a diffent Level connector on either side of the span.
So with fiber patch cords, there are endless combinations of lengths and connector types
| Connector Type | LC-LC |
| Polish Type | UPC |
| Fiber Mode | SINGLE MODE |
| Insertion Loss | ≤0.3dB |
| Return Loss | ≥50dB |
| Jacket OD | 2.0MM |
| Jacket Material | PVC/LSZH |
Specification
Features
Protection of stainless steel tube with small caliber.
Avoid the damage of torsion.
High tensile coefficient and stress coefficient.
Convenient for application, highly security.
Application without damage to cable.
Manufacture without damage to cable.
Cost cutting for maintenance.
Application
Area network
Test equipment
National defence
FO sensor
Light communication system
Common antenna TV system
Order information
