18 Years Factory Fc Fiber Adapter - ST SM DX Metal Adapter – Evolux Lighting

Short Description:

ST SM DX Metal Adapter Fiber optic adapter, sometimes also called coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. We supplies a wide ran...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

We have been experienced manufacturer. Wining the majority of the crucial certifications of its market for Duplex Lc Optical Cpri Cable , Upc To Apc Adapter , St And Sc Connectors , Please feel free to contact us at any time. We will reply you when we receive your inquiries. Please note that samples are available before we start our business.

18 Years Factory Fc Fiber Adapter - ST SM DX Metal Adapter – Evolux Lighting Detail:

ST SM DX Metal Adapter

Fiber optic adapter, sometimes also called coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines.

By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. We supplies a wide range of mating sleeves and hybrid adapters, including special male to female hybrid fiber optic adapter

Adapters are designed for multimode or singlemode cables. The singlemode adapters offer more precise alignment of the tips of the connectors (ferrules). It is ok to use singlemode adapters to connect multimode cables, but you should not use multimode adapters to connect singlemode cables. This can cause misalignment of the small singlemode fibers and loss of signal strength (attenuation).

Connector Type	ST
Polish Type	UPC
Fiber Mode	Single mode
Fiber Counts	Duplex
Insertion Loss	≤0.2dB

Specification

Parameter	Unit	LC,SC,FC,ST,MTRJ,MPO
		SM			MM
		PC	UPC	APC	PC
Insertion Loss(Typical)	dB	≤0.2dB	≤0.2dB	≤0.2dB	≤0.2dB
Return Loss	dB	≧45	≧50	≧60	≧30
Exchangeability	dB	≤0.2dB
Repeatability	dB	≤0.2dB
Durability	Time	>1000
Operating Temperature	℃	-40~75
Storage Temperature	℃	-40~85

Features

Accurate Mechanical Dimensions

Low Insertion Loss,high return loss

Excellent compatibility

Excellent repeatability

Excellent Temperature stability

No Polishing, no Epoxy

More Convenient to install

Application

Local Area Network

Optical fiber communication system

Optical access network(OAN)

Optical CATV

Optical fiber sensor

Fiber optics data transmission(FODT)

Active device termination

Equipment test

Product detail pictures:

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for 18 Years Factory Fc Fiber Adapter - ST SM DX Metal Adapter – Evolux Lighting, The product will supply to all over the world, such as: Finland , Jamaica , Cologne , Our company always committed to meet your quality demand, price points and sales target. Warmly welcome you open the boundaries of communication. It is our great pleasure to service you if you need a trusted supplier and value information.

Adapter Fc Simplex